Best Nissan 350z Rims

After buying a Nissan 350z, an upgrade to aftermarket wheels are on almost every owners list.

It’s not that anything is wrong with the stock 350z rims, it’s just that your needs are different from the next guy. Aftermarket wheels allow you to:

  1. shave off some weight, which is great Z33 mod to improve performance through better acceleration,
  2. fine tune your wheel/tire combo, and do things like widen the track of your 350z to improve handling,
  3. give your car a unique look, make it look awesome and turn some heads.

This guide will tell you everything you need to know about 350z wheels, including correct sizes and offsets. Then we’ll run though what we think are the best 350z rims on the market.

We’ll finish up with some recommendations of our favorite cheap 350z wheels, the best lightweight wheels and the ones we think look the best on a Z33.

Things to Consider Before Buying 350z Rims

First, the basics: every model of the Nissan 350z uses a 5×114.3 bolt pattern. If you don’t get wheels in this bolt pattern, they will not be able to be installed on your car.

Before buying any aftermarket wheels for your 350z, you need to decide on a few things:

  1. Are you using these wheels for daily driving?
  2. Are you using these wheels to race?
  3. What’s your budget?

These factors will help you narrow down your options.

Nissan 350z in competition use
If you’re planning to use your car for competition use, the weight of your wheels is very important. (U.S AirForce Photo / Senior Airman Larry E. Reid Jr.)

If you’re buying wheels just for daily driving, weight probably isn’t much of an issue for you. But if you’re using your wheels for racing, you’ll want lightweight wheels, preferably forged, as they’re stronger and sturdier.

Forged wheels are much more expensive than cast wheels, though. So if you’re on a strict budget, that probably eliminates about half of your options right out of the gate.

After you make your decisions on those three questions, you need to decide what wheel size and offset will go best with your 350z.

Wheel Diameter and Width

While some 350z models come with 17″ wheels from the factory, almost all owners end up upgrading to 18’s, if not larger.

Generally if you’re heading to the track, that’s as large as you will use as getting maximum traction and keeping tire costs down is more important than looks.

On the street though, 19’s are much more common. Most people run widths between 8.5″-9.5″, with around 9″ being the sweet spot.

Square vs staggered setups are a hotly debated topic. While some 350z owners like being able to rotate their wheels front to back, some will use smaller wheels in the front (19×8.5”, for instance), and larger wheels in the back (19×10.5”).

These fill the guards a bit better and can help with handling.

You can go larger than these sizes a 20×11″ for example, but they will not fit without custom work like fender rolling. Your 350z may need wheel spacers, and you’ll almost definitely need coilovers with nice thin linear springs to fit a wheel in that sort of width.

Wheel Offset

The offset of a wheel is the distance from its hub mounting surface to the centerline of the wheel. The 350z has wide “hips” and a low offset.

Many aftermarket wheels have a lower offset than stock Z33 wheels would, but we’ve made sure to include only wheels that will fit (and look good) on your Z car.

If you’re racing your 350z, you’ll probably want a more aggressive wheel offset, somewhere in the +10mm to +25mm range. With these offsets, your wheels might require to be ‘lipped’ using a fender rolling tool to fit.

Nissan 350z with 18x9.5 +12mm Enkei RPF1 rims
Nissan 350z with 18×9.5 +12mm Enkei RPF1 rims

High offsets of +40mm or more are at risk of not clearing the OEM Brembo brakes or other big brake kits, depending on the calipers themselves, wheel lip size, and spoke design. Stick with a lower offset and you should be fine.

Offsets in the +25mm to +35mm range are generally considered safe, where a fender roll won’t be necessary. These offsets are more common for daily driving wheels, but people also use them for racing when their car doubles as a street car too.

Best Wheel Sizes

If that got too confusing, no problems. Stick with a set up close to the following and you will be safe:

Wheel Size for Track Use: 18×9.5 +15mm
Wheel Size for Street Use: 19×9 +30mm

Top 10 350z Rims

These wheels are all lightweight (some more than others), with varying sizing options (typically in the 18-19” range in diameter and 8.5-10.5” range in width) and offsets.

We’ve cherry picked wheels that are good for racing and daily driving.  Given the Z’s racing heritage, we think proper performance wheels are the right ones to be putting on a 350z – not some something cheap and blingy.

These 10 wheels are some of the best wheels for Nissan 350zs that you’ll find.

Enkei RPF1

Enkei RPF1 Nissan 350z Wheels

Manufacturer Enkei
Rim Size (In.): 17-18
Rim Width (In.): 7-10.5
Weight (lbs): 15
Offset: +15mm
Colors: Black, Chrome, Gold, Silver
Check Prices: Amazon | Enjuku Racing

The Enkei RPF1 wheels are some of the most popular, highly rated wheels on the market for 350z enthusiasts. They’re lightweight and aggressive looking, but have all the functionality of high quality race wheels.

Enkei uses a dual, open stance 6-spoke design to make the wheels more rigid, with better stress dispersion, and to allow for harder braking and better handling. These are some of the best 350z rims around for the racetrack.

A lot of 350z owners will run RPF1s in 18×9.5” up front and 18×10.5” in the rear. You will need to roll your fenders with this setup.

Personally we like the “square” setup, in 18×9.5 front and rear.

These wheels are also available in +38mm offset, but the more aggressive +15mm is more widely used on tuned, modified 350zs. Their low offset widens your track nicely, helping your car to be much flatter through the turns.

Volk Racing TE37 Tokyo Time Attack

Nissan Fairlady Z (Z33) with RAYS TE37 Tokyo Time Attack (TTA) Wheels

Manufacturer RAYS Engineering
Rim Size (In.): 18-19
Rim Width (In.): 9.5-10.5
Weight (lbs): 18.5
Offset: +12mm, +22mm
Colors: Double Black with Diamond-Cut Rim

Volk Racing’s TE37 TTA wheels are rather new, having only been out for five years. They were engineered by RAYS, and are based on the iconic TE37 forged monoblock wheel, which has since been discontinued.

The TE37 basically set the standard for what a performance wheel should be.

The TE37 “Tokyo Time Attack” wheels feature a glossy face and polished lip, and a unique color scheme. The new diamond cutting process gave the forged lip a mirror look, and the wheels also carry a larger lip than previous TE37 models.

TE stands for “Touring Edition,” and 37 stands for the weight of the original TE37: an unprecedented 3.7kg (8.15 lbs) per 15” wheel.

These wheels aren’t only head-turners, they’re also extremely good for track racing. With the proprietary, 100% aluminum blend used to forge these wheels, they are one-of-a-kind rims that are both tough and rigid, and also weigh very little.

The most popular size and offsets for 350z enthusiasts would be 18×9.5” with a +12mm offset (typically for the track), and 19×9.5” (+22mm) or 19×10.5” (+22mm) for street use.

Gram Lights 57DR

Nissan 350z with RAYS Gram Lights 57DR Wheels
RAYS Gram Light 57DRs and the bash bar feature on this Z33. Photo: rugo.z33

Manufacturer RAYS Engineering
Rim Size (In.): 18
Rim Width (In.): 8.5-10.5
Weight (lbs): 20
Offset: +12mm, +22mm, +30mm
Colors: Semigloss Black, Gold, White, Silver, Red, Eternal Blue Pearl, Gun Blue, Matte Bronze, Fluorescent Pink, Matte Graphite, Champion White
Check Prices: Amazon | Enjuku Racing

Gram Lights is another brand manufactured by RAYS Engineering, that promises to “push the casting process to its limits.”

For the 350z, the 57DR wheels come in three width sizes, all on 18” rims. They are 8.5” (+30mm offset), 9.5” (+12 or +22mm offset), and 10.5” (+12 or +22mm offset).

Like many performance oriented wheels, the 350z is best suited to use larger wheels in the rear, so your will be most likely to run 18×9.5” in the front, and 18×10.5” in the back.

If you’re going for a square setup though, 18×9.5″ +22mm all-round is a safe choice.

These wheels use a similar 6-spoke design as the infamous Volk TE37 wheels, though these are less than half the price (but without sacrificing quality). For one-piece, cast construction wheels, the 57DR are some of the best 350z rims you’ll find.

They’re very lightweight (like all RAYS wheels), yet sturdy and dependable. They also come in more colors than any other wheel (11 in all!), including outrageous colors like red and fluorescent pink, making them suitable for any 350z.

XXR 526

2005 Nissan 350z running XXR 526 Wheels

Manufacturer: XXR
Rim Size (In.): 18
Rim Width (In.): 9, 10.5
Weight (lbs): 26.3
Offset: +20mm, +25mm, +35mm
Colors: Black, Chromium Black
Check Prices: Amazon

The XXR 526 wheels came out in 2011 to much fanfare. They’re cast aluminum wheels with a triple plated chrome lip that creates a huge, wide lip depth, making them very aggressive and unique looking.

The split 7-spoke design also helps give them a unique appearance, and makes them sturdy and rigid, too.

These wheels come in three sizes for the 350z:

  • 18×9” (+25mm offset)
  • 18×9” (+35mm offset), and
  • 18×10.5” (+20mm offset).

The best 350z wheel setup (and most popular) using the XXR’s 526 is probably 18×9” +25mm all-round, but some people will go for 10.5 on the rear.

The latter is an aggressive setup though, and fender rolling not a “maybe”, you’ll definitely have to do some fender work.

These are also cheap 350z wheels, costing just a fraction of high-end Japanese wheels like those by Enkei and RAYS.

Because of that, they’re quite a bit heavier than other performance oriented 350z wheels, making these best for daily drivers that want to stun passersby with looks.

Varrstoen ES2

Varrstoen ES2 on a Nissan 350z

Manufacturer: Varrstoen
Rim Size (In.): 18-19
Rim Width (In.): 9.5-11
Weight (lbs): 22.95, 25.3
Offset: +12mm – +45mm
Colors: Hyper Black, Silver
Check Prices: Amazon

Varrstoen’s ES2 wheels are a 6-spoke concave design that will make your 350z shine. They’re available in all sorts of sizes, though we’ll stick to 18” and 19” for the 350z.

These wheels have actually been discontinued by the manufacturer, which is a real shame. Thankfully, you can still pick them up around the place – if you can find a set, jump on them!

The offsets for the ES2 come in multiples of five, starting at +15mm (+20mm, +25mm, +30mm, etc.) with the exception of the +12mm and +22mm wheels.

The most common ES2 wheels used by 350z owners are either 19×9.5” or 19×10.5” with a low offset, or 18×10.5”. ES2.2’s in these sizes look amazing on a lowered Z.

These wheels are used by racing teams all over the world, so you can be sure you’re getting some of the best 350z wheels on the market, that are very well built.

SSR GTX01

SSR GTX01 on a Nissan 350z
SSR GTX01 on a Nissan 350z. Photo: probablydylanford

Manufacturer: SSR
Rim Size (In.): 18-19
Rim Width (In.): 7.5-10.5
Weight (lbs): 18.65 – 23.74
Offset: +15mm – +45mm
Colors: Dark Silver, Flat Black
Check Prices: Enjuku Racing

SSR offers these GTX01 wheels with a beautiful 10-spoke design, giving them a very modern look. They’re made using “Flow Forming Technology,” making them lightweight wheels that use less material but retain high strength properties.

These wheels are also available in three separate, unique face types:

  1. Type A (Flat)
  2. Type B (Semi Concave)
  3. Type C (Concave)

As if anyone wants wheels that aren’t concave nowadays…

They come in various sizes, though as usual, for the 350z you should use mid- to larger-sized wheels: 18×9.5” (+15mm or +22mm offset), 18×10.5” (same offsets available), or one of the 19” sizes.

The widths for the 19” wheels are 8.5”, 9.5”, and 10.5”, with offsets ranging from +22mm with the widest wheel, to +45mm for the skinniest.

Many 350z enthusiasts use these wheels on their daily drivers, though they’re definitely light and strong enough to take on the track.

Cosmis Racing XT206-R

Cosmis Racing XT206-R

Manufacturer: Cosmis Racing
Rim Size (In.): 18, 20
Rim Width (In.): 9-11
Weight (lbs): 24 – 27
Offset: +8mm, +10mm, +33mm, +35mm, +45mm
Colors: Black Chrome, White, Hyper Bronze, Black, Gun Metal, Bronze, Gold, Hyper Red, Hyper Gold, Black w/Machined Lip, Gun Metal w/Machined Lip
Check Prices: Amazon

Cosmis Racing’s XT206-R wheels are cheap 350z rims that come in a multitude of colors (as many as the Gram Lights 57DR, in fact), and some odd sizes.

There is no 19” wheel available though, which is pretty much the standard size for tuned 350zs.

The sizes available for Z owners are:

  • 18×9” +33mm
  • 18×9.5” +10mm
  • 18×11” +8mm
  • 20×9” +35mm
  • 20×10.5” +45mm

The 20” wheels aren’t necessarily too big for the 350z, but they aren’t our first pick.

And the 11” wide rims are reserved for the rear end of slammed 350z’s with super stretched tires and lots of camber (350z coilovers are good for this setup).

If you’re not up for the challenge of fitting monster wheels, stay safe with the 18×9.5” +33mm wheels. They’ll look great, especially if your car has a slight drop using coilovers or 350z lowering springs.

These wheels are built using a split 6-spoke design, a classic design that helps with stress dispersion and sturdiness.

Aodhan DS-02

Aodhan DS-02 rims on a Nissan 350z
Aodhan DS-02 rims on a Nissan 350z. Photo: @deathwish_350z

Manufacturer: Aodhan
Rim Size (In.): 18-19
Rim Width (In.): 8.5-11
Weight (lbs): 25.6
Offset: +15mm, +22mm, +30mm, +35mm
Colors: Bronze w/Machined Lip, Silver w/Machined Face
Check Prices: Amazon

The Aodhan DS-02 wheels feature an open, concave, twisted 5-spoke design with a deep dish lip. You wouldn’t know how cheap they are by looking at them.

They are pretty popular among 350z enthusiasts, though Aodhan isn’t as well known of a brand as, say, Enkei or Volk Racing.

They come in pretty typical sizes for the Nissan 350z with 19×9.5 +22mm being our favorite.

For those going for an aggressive stance, they offer an enormous 19×11″ wheel, which mean serious fender rolling, camber, coilovers and stretched tires.

For the price, it’s hard to beat these wheels. Many 350z drivers don’t like them because they weigh over 25 lbs, but if they are only being used for daily driving, they’re a pretty solid option.

It’s up to personal preference, really, and whether you plan to hit the track or not. These aren’t forged wheels, but onlookers will never know.

Volk Racing CE28N

Volk CE28N on Black Nissan Fairlady Z
Volk CE28N on Black Nissan Fairlady Z. Photo: jaywashington

Manufacturer: RAYS Engineering
Rim Size (In.): 18
Rim Width (In.): 8.5-10.5
Weight (lbs): 17.76 – 18.76
Offset: +18mm, +28mm, +30mm
Colors: Bronze, Hyper Blue, Hyper Red, Racing Green, Hyper Gold
Check Prices: Enjuku Racing

The Volk Racing CE28N wheels by RAYS come in both 8-spoke and 10-spoke designs, with a bunch of cool, glossy colors to choose from. There’s no subtlety with these wheels, these are racing wheels through and through.

They come in just a few 350z compatible sizes:

  • 18×8.5” +30mm
  • 18×9.5” +28mm
  • 18×10.5” +18mm

Even though they come in limited options, they’re still some of the most popular wheels that 350z drivers use (anything by Volk is, really).

Like other Volk Racing wheels, these are forged from monoblock construction, meaning they aren’t cheap.

Both the 8- and 10-spoke designs are popular for racing, as they’re strong and lightweight.

In fact, these wheels are even lighter than the TE37s (and most other wheels on this list!) at just 17.76 lbs at the 18×9.5” size.

Enkei NT03 Racing Wheel

Enkei NT03 on a Nissan Fairlady Z in Japan
NT03’s. So hot right now. Photo: y.ryo_ga

Manufacturer: Enkei
Rim Size (In.): 18
Rim Width (In.): 7.5-10.5
Weight (lbs): 19.9
Offset: +27mm, +30mm, +37mm, +38mm, +40mm
Colors: F1 Silver
Check Prices: Amazon | Enjuku Racing

We began with Enkei, so we’ll end with them—it’s only appropriate since they’re the most popular wheels manufacturer for the 350z, bar none.

The NT03+M wheels are some of the best rims for Nissan 350zs that are hitting the autocross track.

These wheels come in just one color (Silver) and one diameter (18”), though there are various widths and offsets you can choose, depending on what your car is built to do.

350z sizes include:

  • 18×8.5” +38mm
  • 18×9.5” +27mm or +40mm
  • 18×10.5” +30mm

These wheels were designed with a perimeter brace ring that makes them strong and sturdy. They’re very popular for tarmac rally cars as they can take some serious abuse.

They won’t distort easily from things like bumps or scraping against curbs. Like most other Enkei wheels, they’re also very lightweight.

Our Favorite 350z Rims

Since all of the wheels listed are great for racing and daily driving, it’s nearly impossible to pick a wheel based on those two criteria alone.

So, we’ve split this list of the best 350z rims by:

  • price (the cheapest),
  • weight (the lightest), and
  • looks (the most stunning).

Cheap 350z Rims: Cosmis Racing XT206-R

The cheapest rims on this list come in more size options than the other cheap ones (XXR 526). They look awesome with over 11 different color options and a classic 6-spoke design, so you can still stand out even if you’re on a budget.

Lightweight 350z Rims: Enkei RPF1

The most popular 350z wheels are also the lightest and some of the sturdiest, making them great for racing. They come in many different sizes and offsets, and will shave a whole lot of weight.

They’re right in the middle of the pack in terms of price. For a wheel that is so good for racing, they’re actually really good value. That doesn’t mean they are “cheap” though.

These are the official wheels of the McLaren Honda Formula One team, is that’s not confidence enough, we don’t know what is!

Best Looking Rims for the 350z: Volk Racing TE37 TTA’s

With its unique glossy face and polished lip from RAYS’ diamond cutting process, that also gives them a mirrored look, these are simply the best looking wheels on the market.

They’re sure to turn heads. If you have the budget, they’re also great for racing, since they’re some of the lightest and strongest out there. A true do-it-all-wheel, ready to win race day on Saturday and show day on Sunday.

Know of any super special 350z wheels we might have left off? Let us know by leaving a comment!

1 comment

  1. Great write-up! I learned a lot! I’m fixing up my Z, a little at a time as I am on a tight budget. It’s my daily driver and I want it look better than average. I’ve added a duck-tail spoiler and a front bumper clip with a big splitter. Custom headlights and taillights too! Side skirts will be delivered soon! I need new wheels. I like the Gram Lights 57DRs. They’re available in white and U mentioned something about “half the price ” sounds good to me!

Leave a Reply to Christopher Wood Cancel reply

Your email address will not be published. Required fields are marked *